Read from left to right...
|
|
 |
First a hole was dug. This shows some
members commencing the digging! |
 |
After a while, more people joined in! |
 |
A few more members! |
 |
The base was set across the hole before
concrete was poured! |
 |
The wire support inside of the base! |
 |
Some members standing in front of the
wooden base! |
 |
Concrete is being poured to form the
foundation for the guy anchors!
|
 |
Concrete was also inserted into the
base. Here is a picture showing the base directly after concrete was
poured! |
 |
Detailed shot of previous mounting! |
|
|
 |
Many members of the radar team atop the
building on which the radar was previously mounted! |
 |
The antenna had to be removed from it's
previous mount before it was put on the new tower! |
 |
Securing the base! |
 |
The bottom of the antenna had to be hoisted
up onto the base! |
 |
The wire is being raised. The wires
are connected to the ground via the guy anchors that were cemented
earlier. |
 |
The wire was used to pull up the tower!
|
 |
The top portion of the tower is raised!
|
 |
The top portion of the tower is about to be
added on.! |
 |
The antenna is finally raised up! |
